# MetricsQL

VictoriaMetrics implements MetricsQL - query language inspired by PromQL. It is backwards compatible with PromQL, so Grafana dashboards backed by Prometheus datasource should work the same after switching from Prometheus to VictoriaMetrics. Standalone MetricsQL package can be used for parsing MetricsQL in external apps.

If you are unfamiliar with PromQL, then it is suggested reading this tutorial for beginners.

The following functionality is implemented differently in MetricsQL comparing to PromQL in order to improve user experience:

- MetricsQL takes into account the previous point before the window in square brackets for range functions such as
`rate`

and`increase`

. It also doesn’t extrapolate range function results. This addresses this issue from Prometheus. - MetricsQL returns the expected non-empty responses for requests with
`step`

values smaller than scrape interval. This addresses this issue from Grafana. - MetricsQL treats
`scalar`

type the same as`instant vector`

without labels, since subtle difference between these types usually confuses users. See the corresponding Prometheus docs for details. - MetricsQL removes all the
`NaN`

values from the output, so some queries like`(-1)^0.5`

return empty results in VictoriaMetrics, while returning a series of`NaN`

values in Prometheus. Note that Grafana doesn’t draw any lines or dots for`NaN`

values, so usually the end result looks the same for both VictoriaMetrics and Prometheus. - MetricsQL keeps metric names after applying functions, which don’t change the meaining of the original time series. For example,
`min_over_time(foo)`

or`round(foo)`

leave`foo`

metric name in the result. See this issue for details.

Other PromQL functionality should work the same in MetricsQL. File an issue if you notice discrepancies between PromQL and MetricsQL results other than mentioned above.

MetricsQL provides additional functionality mentioned below, which is aimed towards solving practical cases. Feel free filing a feature request if you think MetricsQL misses certain useful functionality.

*Note that the functionality mentioned below doesn’t work in PromQL, so it is impossible switching back to Prometheus after you start using it.*

This functionality can be tried at an editable Grafana dashboard.

`WITH`

templates. This feature simplifies writing and managing complex queries. Go to`WITH`

templates playground and try it.- Range duration in functions such as rate may be omitted. VictoriaMetrics automatically selects range duration depending on the current step used for building the graph. For instance, the following query is valid in VictoriaMetrics:
`rate(node_network_receive_bytes_total)`

. - All the aggregate functions support optional
`limit N`

suffix in order to limit the number of output series. For example,`sum(x) by (y) limit 10`

limits the number of output time series after the aggregation to 10. All the other time series are dropped. - Metric names and metric labels may contain escaped chars. For instance,
`foo\-bar{baz\=aa="b"}`

is valid expression. It returns time series with name`foo-bar`

containing label`baz=aa`

with value`b`

. Additionally,`\xXX`

escape sequence is supported, where`XX`

is hexadecimal representation of escaped char. `offset`

, range duration and step value for range vector may refer to the current step aka`$__interval`

value from Grafana. For instance,`rate(metric[10i] offset 5i)`

would return per-second rate over a range covering 10 previous steps with the offset of 5 steps.`offset`

may be put anywere in the query. For instance,`sum(foo) offset 24h`

.`offset`

may be negative. For example,`q offset -1h`

.- Range duration and offset may be fractional. For instance,
`rate(node_network_receive_bytes_total[1.5m] offset 0.5d)`

. `default`

binary operator.`q1 default q2`

fills gaps in`q1`

with the corresponding values from`q2`

.- Most aggregate functions accept arbitrary number of args. For example,
`avg(q1, q2, q3)`

would return the average values for every point across`q1`

,`q2`

and`q3`

. `histogram_quantile`

accepts optional third arg -`boundsLabel`

. In this case it returns`lower`

and`upper`

bounds for the estimated percentile. See this issue for details.`if`

binary operator.`q1 if q2`

removes values from`q1`

for missing values from`q2`

.`ifnot`

binary operator.`q1 ifnot q2`

removes values from`q1`

for existing values from`q2`

.- Trailing commas on all the lists are allowed - label filters, function args and with expressions. For instance, the following queries are valid:
`m{foo="bar",}`

,`f(a, b,)`

,`WITH (x=y,) x`

. This simplifies maintenance of multi-line queries. - String literals may be concatenated. This is useful with
`WITH`

templates:`WITH (commonPrefix="long_metric_prefix_") {__name__=commonPrefix+"suffix1"} / {__name__=commonPrefix+"suffix2"}`

. - Comments starting with
`#`

and ending with newline. For instance,`up # this is a comment for 'up' metric`

. - Rollup functions -
`rollup(m[d])`

,`rollup_rate(m[d])`

,`rollup_deriv(m[d])`

,`rollup_increase(m[d])`

,`rollup_delta(m[d])`

- return`min`

,`max`

and`avg`

values for all the`m`

data points over`d`

duration. `rollup_candlestick(m[d])`

- returns`open`

,`close`

,`low`

and`high`

values (OHLC) for all the`m`

data points over`d`

duration. This function is useful for financial applications.`union(q1, ... qN)`

function for building multiple graphs for`q1`

, …`qN`

subqueries with a single query. The`union`

function name may be skipped - the following queries are equivalent:`union(q1, q2)`

and`(q1, q2)`

.`ru(freeResources, maxResources)`

function for returning resource utilization percentage in the range`0% - 100%`

. For instance,`ru(node_memory_MemFree_bytes, node_memory_MemTotal_bytes)`

returns memory utilization over node_exporter metrics.`ttf(slowlyChangingFreeResources)`

function for returning the time in seconds when the given`slowlyChangingFreeResources`

expression reaches zero. For instance,`ttf(node_filesystem_avail_byte)`

returns the time to storage space exhaustion. This function may be useful for capacity planning.- Functions for label manipulation:
`alias(q, name)`

for setting metric name across all the time series`q`

.`label_set(q, label1, value1, ... labelN, valueN)`

for setting the given values for the given labels on`q`

.`label_map(q, label, srcValue1, dstValue1, ... srcValueN, dstValueN)`

for mapping`label`

values from`src*`

to`dst*`

.`label_del(q, label1, ... labelN)`

for deleting the given labels from`q`

.`label_keep(q, label1, ... labelN)`

for deleting all the labels except the given labels from`q`

.`label_copy(q, src_label1, dst_label1, ... src_labelN, dst_labelN)`

for copying label values from`src_*`

to`dst_*`

.`label_move(q, src_label1, dst_label1, ... src_labelN, dst_labelN)`

for moving label values from`src_*`

to`dst_*`

.`label_transform(q, label, regexp, replacement)`

for replacing all the`regexp`

occurences with`replacement`

in the`label`

values from`q`

.`label_value(q, label)`

- returns numeric values for the given`label`

from`q`

.

`label_match(q, label, regexp)`

and`label_mismatch(q, label, regexp)`

for filtering time series with labels matching (or not matching) the given regexps.`sort_by_label(q, label)`

and`sort_by_label_desc(q, label)`

for sorting time series by the given`label`

.`step()`

function for returning the step in seconds used in the query.`start()`

and`end()`

functions for returning the start and end timestamps of the`[start ... end]`

range used in the query.`integrate(m[d])`

for returning integral over the given duration`d`

for the given metric`m`

.`ideriv(m)`

- for calculating`instant`

derivative for`m`

.`deriv_fast(m[d])`

- for calculating`fast`

derivative for`m`

based on the first and the last points from duration`d`

.`running_`

functions -`running_sum`

,`running_min`

,`running_max`

,`running_avg`

- for calculating running values on the selected time range.`range_`

functions -`range_sum`

,`range_min`

,`range_max`

,`range_avg`

,`range_first`

,`range_last`

,`range_median`

,`range_quantile`

- for calculating global value over the selected time range. Note that global value is based on calculated datapoints for the inner query. The calculated datapoints can differ from raw datapoints stored in the database. See these docs for details.`smooth_exponential(q, sf)`

- smooths`q`

using exponential moving average with the given smooth factor`sf`

.`remove_resets(q)`

- removes counter resets from`q`

.`lag(q[d])`

- returns lag between the current timestamp and the timestamp from the previous data point in`q`

over`d`

.`lifetime(q[d])`

- returns lifetime of`q`

over`d`

in seconds. It is expected that`d`

exceeds the lifetime of`q`

.`scrape_interval(q[d])`

- returns the average interval in seconds between data points of`q`

over`d`

aka`scrape interval`

.- Trigonometric functions -
`sin(q)`

,`cos(q)`

,`asin(q)`

,`acos(q)`

and`pi()`

. `range_over_time(m[d])`

- returns value range for`m`

over`d`

time window, i.e.`max_over_time(m[d])-min_over_time(m[d])`

.`median_over_time(m[d])`

- calculates median values for`m`

over`d`

time window. Shorthand to`quantile_over_time(0.5, m[d])`

.`median(q)`

- median aggregate. Shorthand to`quantile(0.5, q)`

.`limitk(k, q)`

- limits the number of time series returned from`q`

to`k`

.`any(q) by (x)`

- returns any time series from`q`

for each group in`x`

.`keep_last_value(q)`

- fills missing data (gaps) in`q`

with the previous non-empty value.`keep_next_value(q)`

- fills missing data (gaps) in`q`

with the next non-empty value.`interpolate(q)`

- fills missing data (gaps) in`q`

with linearly interpolated values.`distinct_over_time(m[d])`

- returns distinct number of values for`m`

data points over`d`

duration.`distinct(q)`

- returns a time series with the number of unique values for each timestamp in`q`

.`sum2_over_time(m[d])`

- returns sum of squares for all the`m`

values over`d`

duration.`sum2(q)`

- returns a time series with sum of square values for each timestamp in`q`

.`geomean_over_time(m[d])`

- returns geomean value for all the`m`

value over`d`

duration.`geomean(q)`

- returns a time series with geomean value for each timestamp in`q`

.`rand()`

,`rand_normal()`

and`rand_exponential()`

functions - for generating pseudo-random series with even, normal and exponential distribution.`increases_over_time(m[d])`

and`decreases_over_time(m[d])`

- returns the number of`m`

increases or decreases over the given duration`d`

.`prometheus_buckets(q)`

- converts VictoriaMetrics histogram buckets to Prometheus buckets with`le`

labels.`buckets_limit(k, q)`

- limits the number of buckets (Prometheus-style or VictoriaMetrics-style) per each metric returned by by`q`

to`k`

. It also converts VictoriaMetrics-style buckets to Prometheus-style buckets, i.e. the end result are buckets with with`le`

labels.`histogram(q)`

- calculates aggregate histogram over`q`

time series for each point on the graph. See this article for more details.`histogram_over_time(m[d])`

- calculates VictoriaMetrics histogram for`m`

over`d`

. For example, the following query calculates median temperature by country over the last 24 hours:`histogram_quantile(0.5, sum(histogram_over_time(temperature[24h])) by (vmbucket, country))`

.`histogram_share(le, buckets)`

- returns share (in the range 0..1) for`buckets`

that fall below`le`

. Useful for calculating SLI and SLO. For instance, the following query returns the share of requests which are performed under 1.5 seconds during the last 5 minutes:`histogram_share(1.5, sum(rate(request_duration_seconds_bucket[5m])) by (le))`

.`topk_*`

and`bottomk_*`

aggregate functions, which return up to K time series. Note that the standard`topk`

function may return more than K time series - see this article for details.`topk_min(k, q)`

- returns top K time series with the max minimums on the given time range`topk_max(k, q)`

- returns top K time series with the max maximums on the given time range`topk_avg(k, q)`

- returns top K time series with the max averages on the given time range`topk_median(k, q)`

- returns top K time series with the max medians on the given time range`bottomk_min(k, q)`

- returns bottom K time series with the min minimums on the given time range`bottomk_max(k, q)`

- returns bottom K time series with the min maximums on the given time range`bottomk_avg(k, q)`

- returns bottom K time series with the min averages on the given time range`bottomk_median(k, q)`

- returns bottom K time series with the min medians on the given time range

`share_le_over_time(m[d], le)`

- returns share (in the range 0..1) of values in`m`

over`d`

, which are smaller or equal to`le`

. Useful for calculating SLI and SLO. Example:`share_le_over_time(memory_usage_bytes[24h], 100*1024*1024)`

returns the share of time series values for the last 24 hours when memory usage was below or equal to 100MB.`share_gt_over_time(m[d], gt)`

- returns share (in the range 0..1) of values in`m`

over`d`

, which are bigger than`gt`

. Useful for calculating SLI and SLO. Example:`share_gt_over_time(up[24h], 0)`

- returns service availability for the last 24 hours.`count_le_over_time(m[d], le)`

- returns the number of raw samples for`m`

over`d`

, which don’t exceed`le`

.`count_gt_over_time(m[d], gt)`

- returns the number of raw samples for`m`

over`d`

, which are bigger than`gt`

.`tmin_over_time(m[d])`

- returns timestamp for the minimum value for`m`

over`d`

time range.`tmax_over_time(m[d])`

- returns timestamp for the maximum value for`m`

over`d`

time range.`aggr_over_time(("aggr_func1", "aggr_func2", ...), m[d])`

- simultaneously calculates all the listed`aggr_func*`

for`m`

over`d`

time range.`aggr_func*`

can contain any functions that accept range vector. For instance,`aggr_over_time(("min_over_time", "max_over_time", "rate"), m[d])`

would calculate`min_over_time`

,`max_over_time`

and`rate`

for`m[d]`

.`hoeffding_bound_upper(phi, m[d])`

and`hoeffding_bound_lower(phi, m[d])`

- return upper and lower Hoeffding bounds for the given`phi`

in the range`[0..1]`

.`last_over_time(m[d])`

- returns the last value for`m`

on the time range`d`

.`first_over_time(m[d])`

- returns the first value for`m`

on the time range`d`

.`outliersk(N, q) by (group)`

- returns up to`N`

outlier time series for`q`

in every`group`

. Outlier time series have the highest deviation from the`median(q)`

. This aggregate function is useful to detect anomalies across groups of similar time series.`ascent_over_time(m[d])`

- returns the sum of positive deltas between adjancent data points in`m`

over`d`

. Useful for tracking height gains in GPS track.`descent_over_time(m[d])`

- returns the absolute sum of negative deltas between adjancent data points in`m`

over`d`

. Useful for tracking height loss in GPS track.`mode_over_time(m[d])`

- returns mode for`m`

values over`d`

. It is expected that`m`

values are discrete.`mode(q) by (x)`

- returns mode for each point in`q`

grouped by`x`

. It is expected that`q`

points are discrete.`rate_over_sum(m[d])`

- returns rate over the sum of`m`

values over`d`

duration.`zscore_over_time(m[d])`

- returns z-score for`m`

values over`d`

duration. Useful for detecting anomalies in time series comparing to historical samples.`zscore(q) by (group)`

- returns independent z-score values for every point in every`group`

of`q`

. Useful for detecting anomalies in the group of related time series.